What minimum letter height, stroke width and spacing can you make from our logo artwork — Direct answer and decision checklist

The short answer: there is no single fixed minimum for mini acrylic letters — it depends on your logo's artwork at the size you want. PEXEO can customise height across a broad range (1–300 cm), but for small logo lettering the practical limit is set by stroke width, counters (the enclosed spaces in letters like a, e, o, B) and the spacing between elements. Send vector artwork and the intended scale; PEXEO reviews it and returns a manufacturable drawing that confirms the smallest size that is both legible and producible. The exact minimum is confirmed per project drawing — it is not a catalogue value you can assume.

What mini acrylic letters are

Mini acrylic letters are laser-cut acrylic letters, typically small-depth, used for crisp interior wayfinding, names and detail lines; they can be edge-lit, face-lit or unlit.

What sets the minimum size from your artwork

When PEXEO reviews a logo for small-scale acrylic letters, these are the factors that decide how small you can go:

• Stroke width — thin lines in the logo must stay within what can be cut cleanly and remain durable; very fine strokes may need to be thickened or the overall size increased.
• Counters — enclosed negative spaces (the hole in 'a', 'e', 'o', 'B') need a minimum open dimension to read and to fabricate.
• Spacing — the gap between adjacent letters or strokes must be wide enough to stay distinct at the intended viewing distance.
• Overall height — PEXEO's height range is 1–300 cm, but the floor for a given logo is governed by the points above, not the 1 cm end of the range.

What to send for an accurate review

• Vector artwork (AI, SVG or CDR) preferred; a high-resolution PDF or even a sketch the factory can redraw is accepted.
• Intended letter height and where the sign will be viewed from.
• Whether the letters should be edge-lit, face-lit or unlit.
• Mounting surface and environment (indoor or outdoor).
• Quantity and destination.

For general sizing guidance across illuminated families, see our guide on channel letter sizes and the 1–300 cm height range.

Confirmed PEXEO specifications

These facts are fixed and stated up front:

• Minimum order quantity is 1 unit.
• Standard production is approximately 10–12 days after the drawing is confirmed; the exact schedule is reconfirmed per order because it varies with quantity, finish and approved drawing.
• Letter or face height can be customised from 1 cm to 300 cm.
• Artwork is accepted in any format, or designed by the factory.
• PEXEO is a brand within NARVEND.

What to verify per project

Confirm these on the drawing or in the quotation rather than assuming:

• Packaging method for international shipping.
• Any electrical certification or protection rating required for your market.

For an outdoor build, the protection level is decided before production. State the environment in writing so the correct construction is used the first time.

Where mini acrylic letters fit your project

Review the full specification on the mini acrylic letters product page. For scope, pricing and lead times, contact PEXEO with your artwork and intended size.

Next step: Share the project artwork, dimensions, quantity, installation location and destination for a project-specific review. Contact PEXEO.

Frequently asked questions